We Are The Preferred Roofing Contractor In Rogers County

Located In Claremore, Serving Rogers County & Greater Tulsa

11462_16.jpg
11463_16.jpg

Installing a New Roof Steps

When installing your new roof we use the following steps: 1. Remove the Old Roofing The old roofing will probably have to be removed before the new roofing material is put in place. Many people will install multiple layers of roofing over top one another to save time; but adding too many layers (i.e., asphalt shingles) can lead to premature failure in the roof. The old roof should be stopped down to the sheathing, and rebuilt. 2. Evaluate the Roof After removing the old roof, evaluate the sheathing. Roof sheathing is made up of flat panels that provide structural support and a base on which roofing materials, like shingles, are attached. Look for any moist areas or trouble spots that will have to be replaced. 3. Protect Against Ice If you live in an area that’s prone to ice for even part of the year, it’s important to install an ice and water barrier around your roof. This product goes on around the edges of the roof, but especially at the very bottom edge that is most prone to the buildup of ice. This sticky underlayment adheres to the roof sheathing, then nailed down for added strength and stability with roofing nails. 4. Put on the Drip Edge The drip edge for the roofing goes down in two different parts of the roof installation. For the lower part of the roof it goes on before the underlayment, for the sides of the roof it goes on after. First, install the metal drip edge along the bottom edge of your home over top of the ice and water barrier. Nail it into place flat against the roof. After you get the roof underlayment installed on your home you have to go over that with drip edge on the sides the same way that you did at the bottom. This prevents water from running over the edge of the siding and then back underneath it. 5. Roofing Underlayment Installation Roof underlayment, whether felt paper or synthetic, is saturated in water resistant materials and comes in two thicknesses, 15# and 30#. The 30# underlayment is twice as durable as the 15#, but the synthetic products are much more durable than either felt paper option. If you are looking for the most effective way to protect your roof besides for the roofing itself, invest in the more expensive synthetic underlayment, it’s the most convenient and durable option. Roll the underlayment along the edge of the roof and secure it in place using cap roof nails every four inches along the outside edges and around eight inches in the center. These cap nails should not go through the drip edge, but instead just above it. Roll out one row of roofing underlayment after another securing it all down with roofing cap nails making sure to overlap the lower row by at least six inches with the next row. Overlap the underlayment sections up to the peak of the roof and then install a row straddling the peak so that the underlayment caps off both sides of the roof at the same time.

Dependable Roofing Services

At us, we don't skimp on parts or workmanship. We pride ourselves on delivering superior products and services at rates that are more than competitive for the Claremore area. We strive to offer every single customer:

  • High-quality roofing materials
  • A wide selection of roofing options
  • Prompt, reliable service
  • Convenient scheduling
  • The most efficient turnaround possible

Trust Our Team of Roofers

When you hire us for your upcoming Claremore roofing project, you'll get quality coupled with peace of mind. Our roofers are licensed and insured, and we set high standards for the contractors we hire. For all of your roofing needs, give us a call today.